Would any Engineering CAD Designers like to connect? Civil, Mechanical, Architectural, etc.

[fad075cd]

I am constantly getting invited to projects that either I do not qualify for or I do not have time for. I always decline and tell them why but I would rather refer another freelancer. Would anyone like to connect to share projects with each other? I want to support one another so please let me know!

-Vanessa

[NikolaS]

Hi Vanessa,

Thanks for posting here. I hope you're able to connect with other professionals in your field.
Also, I'd like to share information about the new Your Network feature we're rolling out. This feature's purpose is to connect you to other freelancers and we're planning to develop and add to it. Meanwhile you can forward work to other freelancers through the referral feature.

[9d480cb7]

HI Vanssa ,

I am professional Cad Draftsams. I would like to be considered for referral. My experties in drafting architectural drawings like floor plans sections & elevation.

I also done MEP cad drawings.

please contact me if you have any work related to me.

I am new at upwork so I have no work here.

Please dont ignore the attached previous workign samples.

[jaac05]

Hi Vanessa, 

I am an experienced mechanical design engineer with expertise in designing special purpose machines, conveyors, Material handling equipments, fixtures, industrial automation projects. I would like to get referred by you.

Thanks and best regards

[designengr-cad · Accepted solution]

Hi Vanessa,  I would like to be considered for referral.  My expertise is (consumer) product design and medical / surgical instrument design / development.  I use Creo (PTC) and SolidWorks.  Thank you for being so considerate.  Scott

[fad075cd]

Hi Scott, thank you for replying. Yes, I will refer you if I get asked to do any designs in your field of expertise. 

-V

[mahrukh-shabbir]

hope this mey work because i have experience of 10 years

**Edited for Community Guidelines**

[j_matte2004]

Hi Vanessa, I would like to be considered for referral. My expertise is civil engineering and design. Thank you for being so considerate

[3e3b0942]

Good day Vanessa. I have more than 17 years of experience in AutoCAD. Transferred several thousand drawings to autocad. Most of the drawings are building plans. I also do translation in autocad files. Maybe my experience will be useful to someone.

[6adf4892]

Hello vanessa

I saw your post in the Upwork community about receiving a high volume of job invitations. Congratulations on your success! I'm currently facing some challenges in acquiring job opportunities and would greatly appreciate it if you could refer me to any clients who may be in need .

I have [photo editor,video editior,graphic designer]. I am committed to delivering high-quality work and meeting clients' needs.

Your support and referral would be invaluable in expanding my freelance career on Upwork. Thank you for considering me as a potential candidate.

Best regards, haram murtaza

[7dbd915d]

Hi Vanessa,

as a Mechanical Design Engineer, specializing in SolidWorks, Autodesk Inventor, and Fusion 360. My work involves creating detailed 2-D drawings 3-D models and analysis, always ensuring they meet ISO, DIN, ASME, ASTM and GD&T standards.

It would be my pleasure to provide you with suggestions. I understand very well that you need a quality product and a fast turnaround time to start making money as soon as possible.

and that's why I'm here and working to complete your task as best as possible, as quickly as possible, cheapest and on time. 

I look forward to your reply.

Best regards,

Oleh Khalus

[deardipu]

Hi Vanessa, 

You may refer me for consumer product CAD design, sheet metal design, mold design, or other CAD design projects relevant to industrial engineering. Solidworks is used as a tool for these kinds of works. 

Thank you. 

[romanogaspari]

Hi Vanessa. I am Class A parametric surfacing and reverse engineering specialist. I have been chief design engineer in small italian sport car factory. More than ten years of experience working in automotive.

[49fa528c]

Hi Vanessa,

I'm an architect working in Dubai for the last 25 years ago, I can support all our colleagues in the group with the following tasks:

• Architectural design, design development, design review that the Client’s provided in compliance with international code and providing review report and suggestions.
• Creating building designs and highly detailed drawings by using the latest design software like AutoCAD
• Designing and preparing drawings for residential and commercial buildings, hotels, villas, schools, and industrial facilities
• Providing electrical, mechanical, structural, and civil designs
• Carry out plans for the interior and exterior features of the projects.

[ahmadyosuf]

Hello Venessa, I'm excited to try this new feature as well!

If you are creating a group for mechanical design and/or joining one, please consider sending me a message to connect. While I am not the expert here, I know someone who is, primarily in 3D printers (design and maintainence) and mechanical design in general.

Cheers and thank you for initiating this!

[rakeshkumar66]

Hi Vanessa,  I would like to be considered for referral.  My expertise is SEO, Google ads, Facebook ads, Web development. Thanks

[malinga_damith]

yea I am interested 

[papia_shubham]

Hello Vanessa,

My expertise is in Mechanical design like Jig,Fixture, sheetmetal parts and tools, Special purpose machine. I'm having hands on experiance in CATIA, Solid works and Auto CAD. I will love to be recommended by you. 

Thanks,

Papia

[maxmavin]

Hi Vanessa,
I am an electronics hardware design engineer. I do circuit design and PCB design. If you get this type of job invitation, please refer to me. 🙂
Thanks and Regards
Rahman

[mohamedsaads]

Hiii vanessa

I would like to be considered you referral

I am an architect with 10 years of experience and i can work with autocad and 3dsmax

Here is my portfolio

**Edited for Community Guidelines**

[optoswitch]

Hi Vanessa, I would appreciate invites or referral relating to civil engineering.

I am  an expert in CAD. Software programs that I use include AutoCAD, AutoCAD civil 3d and Revit.

[fad075cd]

Hi Thank you for reaching out. I will let you know if I find any projects
that I can't do!

[abdullah0101]

Hi Vanessa!

I am a senior year Mechanical Engineering Student and would like to be referred for related projects. Software that I use include PTC (Creo) and Solidworks 

[dd63c576]

Vanessa, 

Goodday Plz see my profile and portfolio. Would be glad to hear from you. Tnx

[e7cf4835]

I am an architectrual designer well versed in 2D detailing,  construction detailing,  3D visualization in Lumion and project management.